Western States Garage Door Supply, Inc. wants to be your choice for commercial garage doors in the Butte, Montana area. You are sure to find exactly what you are looking for and much more!

Contact us today or call us directly at 406-782-3667 for more information on the garage door products we can offer you. Thank you for visiting us at Western States Garage Door Supply, Inc.

Model 4400/4500

Premium Commercial / Industrial Sectional Steel Overhead Door

Constructed of top quality materials, designed for each application and engineered for years of dependable operation.

Features:

  • Hot Dipped galvanized steel construction with hemmed inside return rail.
  • 1.0 mil paint system includes .25 mil rust inhibiting primer and .75 mil exterior top coat that resists fading and chalking while providing consistent color from panel to panel.
  • Stiles attached with rivets to provide superior strength when compared to common sheet metal joining methods.
  • 17 gauge hot dipped galvanized stiles.
  • Sections include tongue and groove meeting rails for superior strength and better sealing against wind, rain and snow.
  • Rigid aluminum retainer provides added strength while securing replaceable u-shapped bottom weatherstrip.
  • Model 4400 features smooth finish.
  • Model 4500 features pebble grain finish.
  • Models 4401 and 4501 are insulated (R value: 6.85) with CFC Free expanded polystyrene with a high impact plastic back cover.

Model 6500

Premium Commercial / Industrial Insulated Sandwich Steel Overhead Door

Constructed of top quality materials, designed for each application and engineered for years of dependable operation.

Features:

  • 2″ Thick sandwich construction with expanded polystyrene core provides an R value of 10.25
  • 1.0 mil paint system includes .25 mil rust inhibiting primer and .75 mil exterior top coat that resists fading and chalking while providing consistent color from panel to panel.
  • Constructed with nominal 24 gauge exterior and 26 gauge interior skins from hot dipped galvanized steel. Stucco embossed with 4 minor ribs.
  • 20 gauge hot dipped galvanized steel hinge plates run the full height of section at each hinge location to facilitate the attachment of hinges, handles and struts..
  • Sections include tongue and groove meeting rails for superior strength and better sealing against wind, rain and snow.
  • Rigid aluminum retainer provides added strength while securing replaceable U-shaped bottom weatherstrip.

Model 8000

Premium Aluminum Full View Overhead Door

The right choice when maximum light and visibility are required. Ideally suited for all residential, commercial, and retail establishments. Choose from a variety of glazing options including glass, acrylic, insulated glass or aluminum panels.

Features:

  • DOOR SECTIONS: Door sections are 2″ thick and consist of extruded aluminum rails and stiles assembled with 5/16″ threaded rods and nuts. Glazing is gasketed on all four sides with extruded rubber gaskets and retained on all four sides with extruded aluminum snap-in beads. The end stiles have a visible width of 3 3/8″. Center stiles have a visible width of 2 3/4″. Top rail has a visible height of 2 7/8″ or 4 1/4″ depending on door size. Bottom rail has a visible height of 2 7/8″, 4 1/4″ or 7 1/4″ depending on door size and weight. Combined meeting rails have a visible height of 2 1/2″. Lower meeting rail has an integral reinforcing fin on doors over 12′ 2″ wide (Model 8100) or over 10′ 2″ wide (Models 8400 and 8500).
  • GLAZING: Sections can be glazed with 1/8″ glass or acrylic (Model 8100), 1/4″ glass (Model 8400), or 1/2″ insulated glass (Model 8500). Many glazing options are available including tempered glass, tinted glass, low E glass, or laminated safety glass. .062″ anodized aluminum panels can be used in any section.
  • TRACK: Galvanized track system is 2″ or 3″ depending on door size and weight and can be bracket or angle mounted as required. Optional track configurations include high lift, vertical lift, low headroom, and follow the roof pitch.
  • HARDWARE: Hinges and brackets are made from galvanized steel. Rollers have (10) 1/4″ steel ball bearings in case hardened races.
  • SPRING COUNTERBALANCE: Springs are oil tempered helical wound and stress relieved torsion springs mounted on a cross header shaft supported by bearing brackets. Springs are calculated for 10,000 door cycles. 25K, 50K, or 100K cycles are optional. Cables are galvanized aircraft quality with a minimum 7 to 1 safety factor.
  • FINISH: All aluminum parts are clear anodized, bronze anodized or white powder coated. Powder coated in custom colors available on request.
  • WEATHERSTRIP: Bottom rail has a replaceable U type bottom astragal. Optional weather-stripping is available for header and jambs.
  • LOCK: Lock is interior mounted slide lock.
  • OPERATION: Operation to be manual push up, chain hoist, or electric motor.
  • WIND LOAD: Consult factory for available wind load rated options.